In this section you will find some product cases where we have applied different technologies to manufacture the serial components.
Contact us and we will find the best process to produce your products as well.

Fuel Pump Housings Helvoet is the world's only supplier of phenolic housings machined with Pocket Grinding and single-slides grinding equipment. Component quantities are nearing 500 million since the first products rolled off the line in 1999.
SCR Pump The SCR pump in thermoset is a typical example of substitution from metal to plastic. It is used to reduce the NOX for diesel engines and has to withstand urea (Ad Blue) for its function.
Stator air-conditioning unit The insulation mask products form the stator of an air-conditioning unit and are manufactured by injection molding of BMC (Bulk Molding Compound). Because of the light weight, high strength and high resistance to creep, BMC forms an excellent material for this application.
Rotor for radar system As metal replacement product a pvd coated drum is used in the automotive Advanced Emergency Braking Systems (radar system). Precise tolerances and specific reflection properties are required for this high safety part made of thermoset.
Piston for brake system This thermoset secondary piston is part of the TMC (Tandem Master Cylinder) brake system in automotive. It's a high security part with specific requirements on strength (450bar) and roughness tolerances over lifetime achieved by grinding.
Valve block for gear box The valve block is a high precision as molded part in thermoset material. After the assembly of 4 valves it is used in the DSG gear box (Direct Shift Gear). Precise tolerances, strength and contamination requirements are key to the manufacturing process.